• Tier1GeneralPurposeThermocouples

Tube & Wire Thermocouples

0.00
Contact Us Request a Quote

TGU style general purpose thermocouple probes, sometimes referred to as tube and wire thermocouples are available in many standard and custom configurations.  These are economical thermocouple assemblies that usually consist of a soft insulated fiberglass or Teflon wire that is housed in a stainless steel tube.

Although this is a very simplistic thermocouple design, it is very versatile and durable if specified properly. Diameters of .093” to .500” are available in almost any length and can be formed with 45° and 90° bends.  Almost any type of lead wire or thermocouple connector can be used, which allows for a great deal of flexibility in designing for low-cost applications.

Durex Industries manufactures general use thermocouple sensors for a wide variety of applications up to 800°F (426°C). Sheath material is 304 stainless steel. Type J (Iron-Constantan) calibration is standard.

Typically, this type of sensor assembly is used in foodservice equipment, packaging equipment, medical equipment, laboratory and general industrial applications. Durex Industries designs and manufactures temperature sensors to meet the requirements of commercial and industrial applications.

Style TGU0 with Standard Plug and Crimp Adapter

Thermocouple-Style-TGU0

Part Number Configuration - Example:  TGU0-JG-C12H

TGU0 - TC TypeJunctionSheath Diameter"L" Dimension

 

Style TGU1 with Standard Jack and Crimp Adapter
Thermocouple-Style-TGU1

Part Number Configuration - Example:  TGU1-JG-C12H

TGU1 - TC TypeJunctionSheath Diameter"L" Dimension

 

Style TGU2 with Standard Lead Wire Straight, TGU4 with Standard Lead Wire at 45° Bend, TGU9 with Standard Lead Wire at 90° Bend

Thermocouple-Styles-TGU2-TGU4-TGU9

Part Number Configuration - Example:  TGU2-JG-V18D-035H0

TGU2 - TC TypeJunctionSheath Diameter"L" Dimension"A" DimensionLeadwire TypeTermination Option

 

Part Number Configuration - Example:  TGU4-JG-V18D-035H0

TGU4 - TC TypeJunctionSheath Diameter"L" Dimension"A" DimensionLeadwire TypeTermination Option

 

Part Number Configuration - Example:  TGU9-JG-V18D-035H0

TGU9 - TC Type JunctionSheath Diameter"L" Dimension"A" DimensionLeadwire TypeTermination Option


 

Tube & Wire Thermocouples Specs & Options

Back to Top

Thermocouple Types

Thermocouple Type Codes Limits of Error
E J K T Standard Limits
2 3 4 8 Special Limits

 

Junction Type

Code Single Junction
G Grounded
U Ungrounded
 

 

Sheath Diameters

Code O.D. Size
T .020” O.D.
Y .032" or 1/32" O.D.
W .040" O.D.
A .062” or 1/16” O.D.
B .125” or 1/8” O.D.
V .156” or 5/32” O.D.
C .188” or 3/16” O.D.
D .250” or 1/4” O.D.
E .313” or 5/16” O.D.
F .375” or 3/8” O.D.
H .500” or 1/2” O.D.

 

Dimensional Chart

"L" Dimensions "B" Dimensions "A" Dimensions Fractional Dimension
Letter Codes
“L” dimensions are specified in whole inches and a single alpha character which represents a fraction. Enter the three digit code as follows: “B” dimensions are specified in fractions from ⅛” to 1”. Use the single alpha character to indicate the tip length. Enter the code as follows: “A” dimensions are
specified in whole inches only. Enter the three digit code as follows:
1/16" A 11/16" L
1/8" B 3/4" M
3/16" C 13/16" N
1/4" D 7/8" P
5/16" E 15/16" R
3" 030 10 5/8" 10K 3/8" F 1" S
4 1/2" 04H 12" 120 1/8" B 5/8" K 9" 009 7/16" G 0 No
6 1/4" 06D 15 3/8" 15F 1/4" D 3/4" M 12" 012 1/2" H    
7 7/8" 07P 17 3/4" 17M 3/8" F 7/8" P 36" 036 9/16" J    
9 5/8" 09K 22 1/8" 22B 1/2" H 1" S 144" 144 5/8" K    

 

Lead Wire Type

Leadwire Code Leadwire Type Description
G Fiberglass Leadwire with Overall Fiberglass Jacket
H Stranded Fiberglass Leadwire with SS Overbraid Shield
J Stranded Fiberglass Leadwire with SS Armor Cable Shield
K Teflon Leadwire with Overall Teflon Jacket (400°F Max.)
Standard assemblies supplied with stranded leadwire conductor. Solid conductor available upon request.

 

Termination Types

----Type-0-Termination-Split-Leads.jpg TYPE 0 - SPLIT LEADS

----images/uploads/Type-1-Termination-Spade-Lugs.jpg TYPE 1 - #6 SPADE LUGS

----Type-3-Termination-Standard-Molded-Plug.jpg TYPE 3- STANDARD MOLDED PLUG

----Type-4-Termination-Standard-Cable-Clamp-Jack.jpg TYPE 4 - STANDARD CABLE CLAMP JACK

 

Custom Options Available - Contact us for Engineering Assistance.